Close

Passive Fire Equipment

Fire Door Build-Up Kit - 20mm x 820mm

BFDBU20820

The Intumescent Door Bottom Seal is fitted to the bottom of the door leaf. It consist of an anodised aluminium profile, flame retardant smoke, draught and light excluding silicone gasket and integral high performance intumescent fire seals.

Application

Used to upgrade existing fire doors where door bottom gaps exceed the allowable 10mm as per AS1905/1.

The Intumescent Door Bottom Seal is fitted to the bottom of the door leaf. It consist of an anodised aluminium profile, flame retardant smoke, draught and light excluding silicone gasket and integral high performance intumescent fire seals.

Application

Used to upgrade existing fire doors where door bottom gaps exceed the allowable 10mm as per AS1905/1.

Downloads

TECHNICAL DATA SHEETS
CATALOGUE

Technical Details

  • Approvals : AS 1530.4
  • Box Quantity : 1
  • Colour : Clear Anodised (Silver) with grey gaskets
  • Fire Rating : 2 Hour
  • Length (mm) : 820mm
  • Single Units : Yes

Product Information

  • Can provide up to 2 hours fire resistance when fitted to the bottom of proprietary fire doors.
  • Non-compliant fire doors can be salvaged.
  • Avoids expensive door build - ups or door replacements.
  • Cost-effective solution.
  • Easy retro-fit installation.
  • No need to remove the door during installation.

Gap Size

To seal gap sizes up to 20mm maximum, under nom. 35mm and 45mm proprietary doors.

Sizes & Finishes

Standard Lengths - 820mm, 920mm, 1070mm and 1220mm
Colours - Clear Anodised (Silver) with grey gaskets
Fixing - Supplied with pre-drilled slotted holes and screws for easy application onto the bottom of door leafs

Approvals

  • Fully tested to AS1530.4 for up to 2 hours on proprietary fire door assemblies
  • Complies with AS1905/1

People Also Bought

30 other products in the same category

Close