Wireless Interconnection Base to suit 140RC series only (230-volt)

View larger

Wireless Interconnection Base to suit 140RC series only (240-volt)

Part Number: P-EIB168RC

The Brooks Wireless Interconnection Base has the following features:

Mains Powered
Designed for use with the Easi-Fit™ compatible product range
RF range 100 metres (minimum) in free space
Uniquely coded to work with one system only
Advanced suppression and calibration technology increases reliability
Low power battery warning in the event of a battery failure
10-year rechargeable lithium battery back-up
5-year guarantee

The Brooks Wireless Interconnection Base has the following features:

Mains Powered
Designed for use with the Easi-Fit™ compatible product range
RF range 100 metres (minimum) in free space
Uniquely coded to work with one system only
Advanced suppression and calibration technology increases reliability
Low power battery warning in the event of a battery failure
10-year rechargeable lithium battery back-up
5-year guarantee

Downloads

TECHNICAL DATA SHEETS

TDS - P-EIB168RC(605.95k)

MANUAL

MANUAL - P-EIB168RC(2.29M)

Technical Details

Width (mm) : 155
Height (mm) : 40
Approvals : AS3786:2014
Battery Back-up : 9-volt Alkaline
Carbon Monoxide : No
Dimensions : L180 x W155 x H40mm
Heat : Yes
Interconnect Capability : Hardwire interconnection (up to 12 interconnected devices). Wireless interconnection possible by installing RadioLINK™ module
Ionisation : No
Length (mm) : 180
Low Battery Warning Alert : Yes
Mains Powered : Yes
Pack Quantity : 1
Photoelectric : No
Single Units : Yes
Test/Reset Button : Yes
Warranty : 5 year (limited) warranty
Weight : 250g

Product Information

The P-EIB168RC RadioLINK™ base houses a Brooks RadioLINK™ module which transmits a Radio Frequency (RF) alarm signal when the unit attached to it is triggered. When an RF alarm signal is received from another RadioLINK™ enabled device, the attached smoke or heat alarm will sound. It therefore eliminates the need to run interconnect wires between all the smoke alarms on different floors and in different rooms.

P-EIB168RC

It is designed for use with the EiB140RC series of Mains Powered Smoke/Heat Alarms. The RadioLINK™ base itself, is also mains powered and has a rechargeable lithium battery for back-up in the event of mains failure. The RadioLINK™ base will normally be wired to the nearest mains circuit in the ceiling (usually the lighting circuit). The Smoke/Heat Alarm is then slid on to the RadioLINK™ base rather than to its normal mounting plate. As many as 12 units can be interconnected in this way.