Close

Mains Powered Home Smoke Alarms

Surface Mount Base with Relay and Battery Back-upView larger

Surface Mount Base with Relay and Battery Back-up

P-EIB128RBU

The Brooks P-EIB128RBU base has the following features:

  • For use with 3000, 140RC and 160e Series alarms
  • Facilitates bulky wiring and conduits
  • Built-in 5A Relay with Pulse or Continuous modes of operation
  • Rechargeable lithium battery back-up

The Brooks P-EIB128RBU base has the following features:

  • For use with 3000, 140RC and 160e Series alarms
  • Facilitates bulky wiring and conduits
  • Built-in 5A Relay with Pulse or Continuous modes of operation
  • Rechargeable lithium battery back-up

Downloads

TECHNICAL DATA SHEETS

Technical Details

  • Carbon Monoxide : No
  • Heat : No
  • Ionisation : No
  • Low Battery Warning Alert : No
  • Mains Powered : Yes
  • Photoelectric : No
  • Test/Reset Button : No

Product Information

The P-EIB128RBU Base has an integral relay that is activated when the alarm connected to the P-EIB128RBU enters alarm mode.

P-EIB128RBU

The relay contacts are isolated and are rated at 250VAC, 5A resistive and can be used for signalling, turning on lights and sirens or activating door release devices etc. The P-EIB128RBU Base is designed to be used with the Brooks 3000, 140RC and 160e Series alarms.

In addition, the P-EIB128COV is a plastic lid for the P-EIB128RBU that allows the unit to be sited remotely to the Alarm, and will also allow non Easi-Fit Alarms to be connected to the P-EIB128RBU.

The P-EIB128RBU Base is designed so that any of the Brooks 3000, 140RC and 160e Series alarms will fit on top.

People Also Bought

29 other products in the same category

Close