Close

90 Degree Elbows

100Nb Gal Mal 90° Elbow

VGME100

STANDARD AND IDENTIFICATION: Standard for production and use EN 10242 : 1994
Fittings made of high quality blackheart malleable cast iron to ASTM A-197, ASTM A47
THREADS: The threads are cut according to AS 1722.1 / ISO 7/1. Parallel internal thread (RP) and tapered external thread (R).
APPLICATION: All the fittings are adequate for the supply of water at recommended maximum working pressure of 1379kPa and gas, steam and compressed air at recommended maximum working pressure of 1034 kPa. Note: Working pressures may also be limited by relevant pressure piping codes or Industry regulations.
DIMENSIONS: All the fittings are manufactured to the specifications of standard BS EN 10242, BS 143, BS 1256
INSPECTION: All the fittings are inspected for conformity with the specifications of standard EN 10242.
MARKING: All the fittings, when possible, are marked with brand and/or with the nominal size Identification.
HOT DIP: The fittings are delivered in hot dip galvanised finish, as prescribed by the standard EN 10242.
LEAK TEST: Applying the standard EN 10242 each individual fitting is subjected to a pressure test with a min. Hydrostatic pressure of 2068 kPa, which is equivalent to a pneumatic pressure of min. 500 kPa, without showing any sign of leakage or abnormality.

STANDARD AND IDENTIFICATION: Standard for production and use EN 10242 : 1994
Fittings made of high quality blackheart malleable cast iron to ASTM A-197, ASTM A47
THREADS: The threads are cut according to AS 1722.1 / ISO 7/1. Parallel internal thread (RP) and tapered external thread (R).
APPLICATION: All the fittings are adequate for the supply of water at recommended maximum working pressure of 1379kPa and gas, steam and compressed air at recommended maximum working pressure of 1034 kPa. Note: Working pressures may also be limited by relevant pressure piping codes or Industry regulations.
DIMENSIONS: All the fittings are manufactured to the specifications of standard BS EN 10242, BS 143, BS 1256
INSPECTION: All the fittings are inspected for conformity with the specifications of standard EN 10242.
MARKING: All the fittings, when possible, are marked with brand and/or with the nominal size Identification.
HOT DIP: The fittings are delivered in hot dip galvanised finish, as prescribed by the standard EN 10242.
LEAK TEST: Applying the standard EN 10242 each individual fitting is subjected to a pressure test with a min. Hydrostatic pressure of 2068 kPa, which is equivalent to a pneumatic pressure of min. 500 kPa, without showing any sign of leakage or abnormality.

Downloads

TECHNICAL DATA SHEETS

Technical Details

  • Size (Inch) : 4
  • Size (mm) : 100

Product Information

Part NumberDescriptionSize (Inch)Size (mm)A (mm)Box Quantity
VGME1010Nb Gal Mal 90° Elbow3/81024
VGME1515Nb Gal Mal 90° Elbow1/21527250
VGME2020Nb Gal Mal 90° Elbow3/42032140
VGME2525Nb Gal Mal 90° Elbow1253780
VGME3232Nb Gal Mal 90° Elbow3244.540
VGME4040Nb Gal Mal 90° Elbow4048.530
VGME5050Nb Gal Mal 90° Elbow2505718
VGME6565Nb Gal Mal 90° Elbow6568.58
VGME8080Nb Gal Mal 90° Elbow38077.56
VGME100100Nb Gal Mal 90° Elbow410096.54

9 other products in the same category

Close