Close

Paging Systems

Our Pro Audio range of products are not certified for use in the fire industry.

Microphone Delay/Mic-Line Recorder

PA-A1760

Designed to be connected in-line between a microphone and an amplifier to remove feedback issues which arise when paging is executed in close proximity to the output speakers. This is achieved by delaying the output audio. The audio into the mic input will be recorded while the PTT contacts are closed. Once the PTT contacts open, the message will be played back.
Designed to be connected in-line between a microphone and an amplifier to remove feedback issues which arise when paging is executed in close proximity to the output speakers. This is achieved by delaying the output audio. The audio into the mic input will be recorded while the PTT contacts are closed. Once the PTT contacts open, the message will be played back.

Product Information

Designed to be connected in-line between a microphone and an amplifier to remove feedback issues which arise when paging is executed in close proximity to the output speakers. This is achieved by delaying the output audio. The audio into the mic input will be recorded while the PTT contacts are closed. Once the PTT contacts open, the message will be played back. It can also operate as a mic or line input recording device. In this mode the recordings are activated/deactivated by a momentary closure of PTT contacts. In this mode there is no delayed audio playback. All recordings are stored on the Micro SD card. Up to 999 recordings can be stored on the card before they are overwritten automatically.

Features:

Australian designed & manufactured
Helps eliminate feedback issues in paging installations
5 pin XLR input
Micro SD card recording
Audio delay or recording modes
PTT recording activation
Selectable ON/OFF audio output
Optional pre-announcement chime (custom MP3, OGG or WAV)
24V DC input

16 other products in the same category

Close