7 Day Timer With Lockdown & Fire Alarm Control

A timed audio announcement, lockdown and fire alarm controller all housed in a convenient 1RU rack mount chassis. For scheduled announcements a total of 200 “event” switching times are available through the timing functions. Each event can be set to turn on from 1 sec up to 24 hours. When a timing event is activated, an MP3 audio file will be played with 99 playback folders to choose from, which include bell, prebell, music and folders 5-99 on the included micro SD card. If more than one MP3 is in a folder the MP3 will be random played. Timing events can be programmed on the unit or with included PC software. The timing events can also be programmed to only trigger the Bell 24V out (and the common 24V out), with no audio output.
The lockdown/fire controller is designed around industry standard building emergency requirements. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g. fire, gas leak, bomb scare, earthquake.
The lockdown, fire, bell tones and cancel function are triggered by the front switches, external wall plates (see below) or by the rear terminal contacts for remote activation. Switched 24V DC Out connections are provided for bell, lockdown, fire or a common out. These contacts are for connection of override relays in remote volume controls, warning strobes, bells etc.
The units timer and bell times can be remotely managed over a local area network (LAN) or virtual private network (VPN) using A 4498 ethernet adaptor pack.
Key Features:

MP3 for bell, prebell & music timing output.
Emergency tones conform to AS 1670.4
Random play of MP3 for prebell and music triggers.
Easy PC based timing event setup
Local & remote triggering of lockdown, fire and bell.
Provision for connection to A4660 touchscreen paging console.
MP3 voice over message (available in the lockdown and the fire cycle)
Switched 24VDC outputs
Pluggable screw terminal connections
Auxiliary level output
Battery backup of current time
24V DC operation
1RU 19” rack case
Suitable for any amplifier with aux input
10 Year Warranty
Australian Designed and Manufactured

.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Guide to programming software.
.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Specifications:
Output Level: 0dBm
Distortion: 0.01%
Frequency Response: 140Hz - 20kHz
Signal to noise ratio: Lockdown/Fire/Chime - 70dB typically

Output Connectors
Audio Output: RCA Stereo Socket
Common 24V DC Out: Screw Terminals
Lockdown 24V DC Out: Screw Terminals
Fire 24V DC Out: Screw Terminals
Bell 24V DC Out: Screw Terminals
Please Note: Output loads limited 0.12Amp each

Input Connectors
24V DC Power: Screw Terminals
24V DC Power: 2.1mm DC Jack
Remote Lockdown, Fire, Bell, Cancel: Screw Terminals
Muting: Via Microphone Switch Contact

Controls
Lockdown/Fire: Rear Volume
Voice over: Rear Volume
Bell: Rear Volume
Prebell: Rear Volume
Music: Rear Volume
Power: On/Off Switch
Lockdown Switch: Illuminated Push Switch
Fire Switch: Illuminated Push Switch
Bell Switch: Illuminated Push Switch
Cancel Switch: Push Switch
Indicators: Power on, MP3 error, Prebell
MP3 File Format: 128kbps, 44.1kHz, 32bit, VBR or CBR, Stereo (even better as mono).

General
Power Supply: 24V DC
Dimensions: ≈482W x 175D x 44H
Weight: ≈2.1 kg
Colour: Black