Emergency Alert & Evacuation Tone Generator

This unit has provision for playback of Alert, Evacuation and chime tones as well as an alert and/or emergency message. When connected to a paging system amplifier, building occupants can be alerted and/or evacuated in the event of an emergency e.g.: fire, gas leak, bomb scare, earthquake. The Alert, Evacuation, Bell, and Emergency Messages are all MP3 based and stored on a Micro SD card which is accessible from the front of the unit. The Alert, Evacuation and bell tones and cancel function are triggered by the front switches, or by the rear terminal contacts for remote activation i.e. a clock, remote switch or optional A 2078B and A 2081 remote wall plates. It features 24V DC switched outputs which are enabled when the Alert, Evac or Chime tones are triggered. It is powered from a 24V DC source (plug pack supplied) and features a line out facility and MP3 based Message Voice Over.

Key Features:

Level controls for alert/evac, bell and voice over
Front panel alert/evac/bell and cancel switches
All tones MP3 based
Alert/Evac Emergency tones can be configured for momentary or continuous operation
1U half rack cabinet
Alert and Evac Tones conform to AS 1670.4
(Library included on Micro SD card)
Compatible with fire indicator boards & break glass
alarms
Remote operation of alert , evac, bell tones & cancel.
Local operation of alert, evac and bell
MP3 based Alert and Evacuation Voice over message facility
Bell chime facility
Switched 24V DC outputs for override relays or strobes
(outputs limited to 120mA)
On-board timer for remote alert activation adjustable
from 30secs to 7.5min in 30 second increments. Switches
from alert to evac after preset time.
Auxiliary level output

Specifications:
Output Level: 0dBm
Distortion: 0.01%
Frequency response: 140Hz - 20kHz
Signal to Noise Ratio: Alert/Evac/Chime: -70dB typically

Output Connectors
Audio Output: RCA Stereo Socket
Switched 24V DC Out: Screw Terminals
Alert 24V DC Out: Screw Terminals
Evac 24V DC Out: Screw Terminals
Bell 24V DC Out: Screw Terminals
PLEASE NOTE: Output loads limited to 120mA.

Input Connectors
24V DC Power: Screw Terminals
24V DC Power: 2.1mm DC Socket Remote Alert,Evac,Bell,Cancel: Screw Terminals

Audio Storage
Micro SD Card: Max 16GB

Controls
Bell, Alert/EvacTones: Rear Volume
Voice over: Rear Volume
Power: On/Off Switch
Alert Switch: Illuminated Push Switch
Evac Switch: Illuminated Push Switch
Bell Switch: Illuminated Push Switch
Cancel Switch: Push Switch
Indicators: Power on, Fault

Power Supply: 24V DC @ 1 Amp
Dimensions: 210W x 122D x 44H
Weight: 0.4 kg