View larger

Max Bond Original Construction Adhesive 320g

Part Number: X-MAXB

Max Bond™ Construction Adhesive is a synthetic, rubber based adhesive designed primarily for the installation of flooring and wall panels.

Max Bond™ Construction Adhesive is also ideal for bonding most common construction materials such as metal, timber and concrete.

Bridges wall gaps, effective when used on uneven surfaces
Reduced squeaking associated with nail ride in floors
Multipurpose
Repositionable for up to 20 minutes after application
Water resistant
High bond strength

Max Bond™ Construction Adhesive is a synthetic, rubber based adhesive designed primarily for the installation of flooring and wall panels.

Max Bond™ Construction Adhesive is also ideal for bonding most common construction materials such as metal, timber and concrete.

Bridges wall gaps, effective when used on uneven surfaces
Reduced squeaking associated with nail ride in floors
Multipurpose
Repositionable for up to 20 minutes after application
Water resistant
High bond strength

Downloads

Technical Details

Box Quantity : 20
Colour : Light Tan
Single Units : Yes
Weight : 320g

Product Information

Max Bond™ Construction Adhesive is a synthetic, rubber based adhesive designed primarily for the installation of flooring and wall panels.

Max Bond™ Construction Adhesive is also ideal for bonding most common construction materials such as metal, timber and concrete.

Bridges wall gaps, effective when used on uneven surfaces
Reduced squeaking associated with nail ride in floors
Multipurpose
Repositionable for up to 20 minutes after application
Water resistant
High bond strength

[ Substrates ]

Ceramic
Plywood
Cement Sheet
Metal
Concrete
MDF
Timber
Fibreglass
Brick
Aluminium
Plasterboard

Not recommended for: mirrors on ceilings, freshly painted surfaces, waterproofed surfaces, wallpaper, copper based material, constant water immersion, vinyl backed mirrors with safety backed film.

[ Uses In ]

Installing particle board, fibre cement, plasterboard, plywood and strip flooring to joists
Bonding fibre cement sheet, plaster board and wall panelling to timber and metal studs
Skirting boards, architraves and trims to walls
Mirrors to vertical walls
Replacing loose tiles on walls (not recommended for floor tiles)

[ How to ]

All surfaces must be clean and free from dust, oil or other contamination. Sand painted surfaces.

Application: Cut off tip of cartridge and pierce inner foil seal, cut nozzle to desired size. Fit Nozzle to cartridge. Use continuous wavy beads spaced at 40cm intervals along flat surfaces, joists, battens or studs. Within 10 minutes, fit surfaces together and press firmly. Can be repositioned for up to 20 minutes. If bond is under immediate stress, support or clamp until a strong bond develops.

In heavy load applications e.g. subfloors, use nails or screws in addition to Max Bond Construction Adhesive. For faster bonding and for mirrors, apply to one surface only, press together, tilt panel back to allow solvent to escape then brace until set. For bonding mirrors apply a 5mm wide bead every 20cm. Do not apply in blobs.