Public Address Amplifier (PA) 250W 6 Input

Designed for applications requiring up to six microphone inputs, without compromising output power and overall performance. Each model features inputs which can be configured for either microphone or line level operation.  Bass/treble controls, phantom powering and adjustable input sensitivity enable unparallelled flexibility for a wide scope of applications such as factories, workshops, mine sites, sports clubs and office buildings.

Key Features:

6 Balanced microphone inputs / 6 Aux inputs / 1 Music input
Robust design incorporating latest Mosfet technology
Very Low noise and distortion
100V standard with optional 70V and 4-16Ω outputs
240V AC or 24V DC operation
VOX muting on inputs 1 and 2 (Switch selectable internally)
Adjustable VOX level sensitivities
Bass and Treble controls
Tape Output
Phantom power on microphone inputs (DIP switch selectable internally)
Multi stage thermally cued fan cooling
Output Peak Limited
Thermal Overload protected
Signal Presence Indicator
Half power mode when overdriven
Fault Indicators
24V DC Power Status Indicator
Optional Alert/Evac module with voice over message for emergency tones (A 4573)
Optional remote volume (With A 4373 Digital volume control module fitted and external A 2280B wall plate)
Rack Mountable (suits 19 inch racks) with optional A 4376 rack ears

Specifications:
Power Outputs
Power: 250 watts RMS
Distortion: < 0.5%, @ 1kHz Output line: 100V

Frequency Response
Mic inputs : 50Hz - 12kHz, -3dB Line inputs: 50Hz - 15kHz, -3dB

Mic Sensitivity
Mic inputs: 3mV
Line inputs: 1V
Music input: 500mV

Signal To Noise Ratio
Mic inputs: > 75dB below rated output

Line Output
600Ω balanced, 0dB , 3 Pin XLR

Output Connectors
Speakers: Screw terminals

Input Connectors
Inputs: 3 pin XLR balanced or 2 x RCA
24V DC power: Screw terminals
240V AC power: IEC power connector

Muting
PTT via microphone switch contacts and VOX muting (inputs 1-2)

Controls
Mic/Line/Music inputs: Volume
Power: On/off switch
Indicators: Power, signal present, output peak limiting, over-temp , overload protect, half power, 24V DC

General
Power Supply: 240V AC or 24V DC
Fuse Protection: 250W - 7.5A AC ,20A DC
Dimensions: ≈483W x 300D x 88H
Weight: ≈ 15.5kg
Current Draw: Min ≈ 350 mA, Max ≈ 20A