Phase5 60W 3 Input 100V Public Address Amplifier

Designed to meet the requirements of medium sized professional public address installations, delivering an output power of 60W RMS. Frequency response extends from 60Hz to 15kHz at a total harmonic distortion (THD) of less than 0.5%. Features include, VOX muting, three balanced XLR microphone inputs, three line RCA inputs, bass and treble controls, enabling a diversity of installation applications, including schools, public halls, workshops and sporting complexes. Inbuilt VOX muting allows input 1 (mic or line) to mute inputs 2-3 and input 2 (mic or line) to mute input 3. 

Powered from 240V AC mains or 24V DC permitting battery backup operation during mains power failure. Output is 100V line only. All units feature thermal overload shutdown to protect the amplifier if a speaker fault condition develops.  

A 4573 Alert/evac option board: When fitted, generates pre chime, bell, alert and evacuation tones.  The alert tone can function continuously, or switch to evac tone after a preset time delay (adjustable 30 seconds to 4.5 minutes).  Simply connects to the  amplifier internally via the cable provided.

A 4373 Digital remote volume option board: When fitted and used in conjunction with A 2280B wallplate to provide remote volume level adjustment. Ideal for situations where the amplifier is located in a remote rack. 

Key Features:

3 balanced microphone inputs
 Phantom power on mic inputs
3 line inputs
19” rack mount kit included
VOX muting
Tape output RCA sockets
Bass and treble tone controls
100V line output
240V AC or 24V DC operation
Built in short circuit protection
10 year warranty
Optional evac module available
Optional remote volume module
Australian designed & assembled

Specifications:
POWER OUTPUTS

Power: 60 Watts RMS

Distortion: < 0.5%, @ 1kHz

Output line: 100V

FREQUENCY RESPONSE

Mic inputs : 50Hz - 12kHz, -3dB

Line inputs: 50Hz - 15kHz, -3dB

MIC SENSITIVITY

Mic inputs: 3mV

Line inputs: 1V

Music input: 500mV

SIGNAL TO NOISE RATIO

Mic inputs: > 75dB below rated output

TAPE OUTPUT

Unbalanced Dual RCA(mono) , Line Level

OUTPUT CONNECTORS

Speakers: Screw terminals

INPUT CONNECTORS

Inputs: 3 pin XLR balanced or 2 x RCA

24V DC power: Screw terminals

240V AC power: IEC power connector

MUTING

PTT via microphone switch contacts, VOX muting (inputs 1-2)

CONTROLS

Mic/Line/Music inputs: Volume

Power: On/off switch

Indicators: Power, signal present, output peak limiting, overtemp ,Overload Protect, Half Power, 24V DC

GENERAL

Power Supply: 240V AC or 24V DC

Fuse Protection: 2A AC, 5A DC

Dimensions: ≈483W x 250D x 88Hmm

Weight: 7.2kg