Phase5 40W 3 Input 100V Public Address Amplifier

Designed to meet the requirements of medium sized professional public address installations, delivering an output power of 40W, 60W and 100W RMS respectively.Frequency response extends from 60Hz to 15kHz at a total harmonic distortion (THD) of less than 0.5%. Features include, VOX muting, three balanced XLR microphone inputs, three line RCA inputs, bass and treble controls, enabling a diversity of installation applications, including schools, public halls, workshops and sporting complexes. Inbuilt VOX muting allows input 1 (mic or line) to mute inputs 2-3 and input 2 (mic or line) to mute input 3. 

Powered from 240V AC mains or 24V DC permitting battery backup operation during mains power failure. Output is 100V line only. All units feature thermal overload shutdown to protect the amplifier if a speaker fault condition develops.  

A 4573 Alert/evac option board: When fitted, generates pre chime, bell, alert and evacuation tones.  The alert tone can function continuously, or switch to evac tone after a preset time delay (adjustable 30 seconds to 4.5 minutes).  Simply connects to the  amplifier internally via the cable provided.

A 4373 Digital remote volume option board: When fitted and used in conjunction with A 2280B wallplate to provide remote volume level adjustment. Ideal for situations where the amplifier is located in a remote rack. 

Key Features:

3 balanced microphone inputs
 Phantom power on mic inputs
3 line inputs
19” rack mount kit included
VOX muting
Tape output RCA sockets
Bass and treble tone controls
100V line output
240V AC or 24V DC operation
Built in short circuit protection
10 year warranty
Optional evac module available
Optional remote volume module
Australian designed & assembled

Specifications:
POWER OUTPUTS
Power: 40 Watts RMS
Distortion: < 0.5%, @ 1kHz
Output line: 100V

FREQUENCY RESPONSE
Mic inputs : 50Hz - 12kHz, -3dB
Line inputs:  50Hz - 15kHz, -3dB

MIC SENSITIVITY
Mic inputs:  3mV
Line inputs: 1V
Music input:  500mV

SIGNAL TO NOISE RATIO
Mic inputs:  > 75dB below rated output

TAPE OUTPUT
Unbalanced Dual RCA(mono) , Line Level

OUTPUT CONNECTORS
Speakers: Screw terminals

INPUT CONNECTORS
Inputs: 3 pin XLR balanced or 2 x RCA
24V DC power: Screw terminals
240V AC power: IEC power connector

MUTING
PTT via microphone switch contacts, VOX muting (inputs 1-2)

CONTROLS
Mic/Line/Music inputs: Volume
Power: On/off switch
Indicators: Power, signal present, output peak limiting, overtemp ,Overload Protect, Half Power, 24V DC

GENERAL
Power Supply: 240V AC or 24V DC
Fuse Protection: 1A AC ,4A DC
Dimensions: ≈483W x 250D x 88Hmm
Weight: 6kg